The Problem

Traditional lead-acid batteries have many defects. This is due to the inherent structural characteristics, which include:

• Plate sulfation
• Active material loss
• Dehydration
• Serious acid polution
• Short cycle life
• Poor low/high temprature characteristics

The Solution

To overcome the structural defects in lead-acid batteries, manufacturers started using AGM and a gel electrolyte bateries. Although this did not solve all the problems, progress was made by:

• Reducing the acid mist
• reducing the water loss rate
• Reducing the self-discharge rate
• Improving the discharge capacity

By solving these problems, a new series of challenges were introduced:

• Poor electrode penetration by the gel electrolyte
• Weak capacity of AGM separator match
• Slow electrode reaction

The Diffrence

In order to overcome the fundamental shortcomings of the lead-acid and AGM or gel batteries, the Lead Crystal Battery uses new proprietary technologies, including:

• Silica crystalline state SiO2 composite electrolyte (not a gel) to replace the conventional sulfuric acid solution
• The preparation method of the Silica crystalline state SiO2 composite electrolyte
• The irrigation fluid device and its battery plus liquid method
• Battery terminals connected to protective devices
• Batteries with liquid shunt valve
• New plates
• New AGM

Diffrence Results

As a result, this self-designed SiO2 cleaning composite electrolyte replaces th conventional sulfuric acid solution/gel. A number of unique and advanced technologies are used in the manufacturing of the Lead Crystal Battery in order to solve the lead-acid/gel battery problems. this includes:

• Virtually no plate sulfation
• No active material loss
• No dehydration
• No acid pollution
• Excellent cycle life
• Very goo low/high temperature characteristics